HCSL Logo

HELLENIC COMPLEX SYSTEMS LABORATORY

 

 

HCSL Publications

Quality Control, Reliability, and Risk

1. Hatjimihail AT. Estimation of the optimal statistical quality control sampling time intervals using a residual risk measure. PLoS ONE 2009 4(6): e5770. doi:10.1371/journal.pone.0005770

Abstract

Background: An open problem in clinical chemistry is the estimation of the optimal sampling time intervals for the application of statistical quality control (QC) procedures that are based on the measurement of control materials. This is a probabilistic risk assessment problem that requires reliability analysis of the analytical system, and the estimation of the risk caused by the measurement error.

Methodology/Principal Findings: Assuming that the states of the analytical system are the reliability state, the maintenance state, the critical-failure modes and their combinations, we can define risk functions based on the mean time of the states, their measurement error and the medically acceptable measurement error. Consequently, a residual risk measure rr can be defined for each sampling time interval. The rr depends on the state probability vectors of the analytical system, the state transition probability matrices before and after each application of the QC procedure and the state mean time matrices. As optimal sampling time intervals can be defined those minimizing a QC related cost measure while the rr is acceptable. I developed an algorithm that estimates the rr for any QC sampling time interval of a QC procedure applied to analytical systems with an arbitrary number of critical-failure modes, assuming any failure time and measurement error probability density function for each mode. Furthermore, given the acceptable rr, it can estimate the optimal QC sampling time intervals.

Conclusions/Significance: It is possible to rationally estimate the optimal QC sampling time intervals of an analytical system to sustain an acceptable residual risk with the minimum QC related cost. For the optimization the reliability analysis of the analytical system and the risk analysis of the measurement error are needed.

Abstract in PubMed

Full Text in PLoS ONE

2. Hatjimihail AT. Core laboratory QC [Letter to the editor]. CAP Today 2015;29(5):8.

Full text (PDF format)